Streamline® Compounding Isolator

Streamline® Compounding Isolator
  • ULPA filters (as per IEST-RP-CC001.3 and HEPA (H14) filter as per EN 1822) with a typical efficiency of >99.999% at 0.1 to 0.3 microns, providing ISO Class 3 air cleanliness as per ISO 14644-1.
  • FDA-grade pressure-tight static seals.
  • Sentinel™ Gold microprocessor controller supervises all functions and monitors airflow and pressure in real-time.
  • Robust dual-wall construction. Unique Esco Dynamic Chamber™ plenum surrounds filter seals with negative pressure.
  • Safe-change cuff rings permit glove changes with zero risk of work zone or environment contamination.

Guide to Models

SCI-__ __ - N S __ - __ __

Isolator

Code

Internal Width

No. of Gloveports

Electrical Code

Code

Pass-through Chamber

Code

Exhaust Type

Code

Sharps Container*

Code

Streamline Compounding Isolator

SCI

910 mm

2G

220-240 V, AC, 50/60 Hz, 1Ø

8

Left

L

Double Exhaust (Top & Bottom)

1

Yes

S

1220 mm

3G

110-120 V, AC, 50/60 Hz, 1Ø

9

Right

R

Single Exhaust (Top)

2

No

0

 

 

 

 

 

 

Single Exhaust (Bottom)

3

 

 

Note: *Sharps container option is not available for Double Exhaust Filter Type

 

Standard Accessories

  • Electromagnetic interlocking doors to prevent cross-contamination​
    • Foot switch included to easily open the inner doors​
  • Single-piece or multi-piece stainless steel 316L work top​
  • Energy efficient LED lighting with higher durability and better quality​

Electrical Outlets and Utility Fittings

  • Electrical outlet, ground fault, North America​
  • Electrical outlet, Euro/Worldwide​​

Support Stands

  • Fixed height, available 711 mm (28") or 864 mm (34") - With levelling feet,     ± 38.1 mm (1.5") (SAL) - With casters (SPC)
  • Telescoping height stand for levelling feet (STL), nominal range 660 mm to 960 mm (26"to 37.8")​
  • Telescoping height stand for casters (STC), nominal range 660 mm to 880 mm (26" to 34.6") - Adjustable in 25.4 mm (1") increments​
  • Infinitely adjustable hydraulic stand with casters elevates to accommodate a sitting or a standing user’s work surface height (SHM)

Support Stands

  • A 4-glove port (4G) design is possible by combining two units of 2-glove port (2G) isolators, interconnected by a vertical non-interlocking door; with two pass-through chambers.​
  • External material of construction:​​
    • Electrogalvanized steel with ISOCIDE™ powder coating​
    • Stainless steel 304
  • Dunk tank​​
    • One dunk tank below the work zone
  • Exhaust types
    • Double HEPA exhaust filter (BIBO top and non-BIBO bottom)​
    • Side Exhaust Connection (for TE units)
  • *Note: Additional carbon filter is available as an option for all exhaust filter configurations​
  • IV bar, with hooks
  • UV lamp
  • Flexible / Thimble exhaust collar
  • Side Exhaust Connection (for TE units)
  • Hard ducting with Anti-blowback valve​
  • Perforated shelf to increase work zone space
  • Cleaning accessories
  • Alarm package
  • Laboratory cart
  • Adjustable foot rest
  • Stainless steel turntable
  • Butterfly valve:
    • Manual​
    • Automatic

Add-Ons

  • Monitor System
  • Mounted on the rear of the isolator​
  • Beside the front panel; equipped with a keyboard and mouse arm​
  • Mobile BioVap™ biodecontamination system​
  • Glove Leak Tester​
  • Automated pressure hold testing (APHT) 
    • With on-board compressed air​
    • with on-board pump (available by 2020)
  • CCTV integration
    • Back wall
    • Front of the visor with a stainless steel mount
  • Back-up battery for the electromagnetic interlocks (contact Esco for more information)​
  • Side-syringe pass-through chamber​